Controllers
Wireless will be available in 3-5 weeks.
The wired controller has a simple interface to operate up to four lifters at one time. The controller has three modes: Range Master, Remote, Standard.
Manual: Each press of the numbered buttons will cycle between “show” and hide” on the lifter group.
If the LED is on next to the number the lifter is in “show”. If the lifter is in “Rotate” mode, a long press of
the button will display the opposite side of the target (shoot/no shoot).
All Targets: Manually activate all lifters simultaneously by pressing button “1”.
Set the time between 1-60 seconds to have targets move from “show” to “hide” in that amount of time.
(timed qualifications, etc.). When time is set to 0, targets will only move when button 1 is pressed.
Random: Choose between different difficulties and time limited random drills using the arrow buttons.
Press button “1” to start, which will begin after 1 beep. 3 beeps will signal the operation is complete.
The internal batteries allows for approximately 1,500 lifts (depending on conditions), and should allow for a full day of training. The controller charges from 0-100 in about 3 hours via USB-C and can be used while it is being charged.
Drill: Choose between different difficulties and time limited preset drills using the arrow buttons.
Pressing button 1-4 will choose a different consistent preset drill. 1 beep signals start of drill.
3 beeps will signal the operation is complete.
The difference between the Standard and Law Enforcement / Commercial is the follow:
Standard does not have the ability to add wireless
Standard only has the ability to control 4 lifter groups instead of 8
The housing is significantly stronger and designed to take more of a beating.
Two year warrant vs 1 year
NOTE: The controller is not designed to be left outdoors overnight, or to be used in inclement weather. Although it shouldn’t have a problem if it gets wet or is left over outside overnight occasionally, but it is not designed for this.
Does no come with a case or cables.
Ships 2-3 weeks after order is placed, although can be faster if items are in stock.
Wireless will be available in 3-5 weeks.
The wired controller has a simple interface to operate up to four lifters at one time. The controller has three modes: Range Master, Remote, Standard.
Manual: Each press of the numbered buttons will cycle between “show” and hide” on the lifter group.
If the LED is on next to the number the lifter is in “show”. If the lifter is in “Rotate” mode, a long press of
the button will display the opposite side of the target (shoot/no shoot).
All Targets: Manually activate all lifters simultaneously by pressing button “1”.
Set the time between 1-60 seconds to have targets move from “show” to “hide” in that amount of time.
(timed qualifications, etc.). When time is set to 0, targets will only move when button 1 is pressed.
Random: Choose between different difficulties and time limited random drills using the arrow buttons.
Press button “1” to start, which will begin after 1 beep. 3 beeps will signal the operation is complete.
The internal batteries allows for approximately 1,500 lifts (depending on conditions), and should allow for a full day of training. The controller charges from 0-100 in about 3 hours via USB-C and can be used while it is being charged.
Drill: Choose between different difficulties and time limited preset drills using the arrow buttons.
Pressing button 1-4 will choose a different consistent preset drill. 1 beep signals start of drill.
3 beeps will signal the operation is complete.
The difference between the Standard and Law Enforcement / Commercial is the follow:
Standard does not have the ability to add wireless
Standard only has the ability to control 4 lifter groups instead of 8
The housing is significantly stronger and designed to take more of a beating.
Two year warrant vs 1 year
NOTE: The controller is not designed to be left outdoors overnight, or to be used in inclement weather. Although it shouldn’t have a problem if it gets wet or is left over outside overnight occasionally, but it is not designed for this.
Does no come with a case or cables.
Ships 2-3 weeks after order is placed, although can be faster if items are in stock.
Wireless will be available in 3-5 weeks.
The wired controller has a simple interface to operate up to four lifters at one time. The controller has three modes: Range Master, Remote, Standard.
Manual: Each press of the numbered buttons will cycle between “show” and hide” on the lifter group.
If the LED is on next to the number the lifter is in “show”. If the lifter is in “Rotate” mode, a long press of
the button will display the opposite side of the target (shoot/no shoot).
All Targets: Manually activate all lifters simultaneously by pressing button “1”.
Set the time between 1-60 seconds to have targets move from “show” to “hide” in that amount of time.
(timed qualifications, etc.). When time is set to 0, targets will only move when button 1 is pressed.
Random: Choose between different difficulties and time limited random drills using the arrow buttons.
Press button “1” to start, which will begin after 1 beep. 3 beeps will signal the operation is complete.
The internal batteries allows for approximately 1,500 lifts (depending on conditions), and should allow for a full day of training. The controller charges from 0-100 in about 3 hours via USB-C and can be used while it is being charged.
Drill: Choose between different difficulties and time limited preset drills using the arrow buttons.
Pressing button 1-4 will choose a different consistent preset drill. 1 beep signals start of drill.
3 beeps will signal the operation is complete.
The difference between the Standard and Law Enforcement / Commercial is the follow:
Standard does not have the ability to add wireless
Standard only has the ability to control 4 lifter groups instead of 8
The housing is significantly stronger and designed to take more of a beating.
Two year warrant vs 1 year
NOTE: The controller is not designed to be left outdoors overnight, or to be used in inclement weather. Although it shouldn’t have a problem if it gets wet or is left over outside overnight occasionally, but it is not designed for this.
Does no come with a case or cables.
Ships 2-3 weeks after order is placed, although can be faster if items are in stock.
Controller / lifter operations
Warranty against manufacture defects are covered for 12 months from shipping date.
If after receiving the product there is a problem or you are unhappy, please reach out. I am confident we will be able to find a solution that works for everyone.